SeedViewBUILD STUDIO home
For grown-ups

11 block circle in Minecraft (radius 5)

A 11-block-wide circle takes 28 blocks for a 1-block outline and 97 to fill it. Go around each quarter in runs of 5·1·1·5. The centre is a single block, because 11 is odd.

28OUTLINE BLOCKS
97FILLED
28STACKS

Download (1 layer, stone):.litematic.schem.mcstructure (Bedrock)How to import

Diameter11 blocks (radius 5 from the centre block)
Outline, thin wall (diagonal steps)28
Outline, thick wall (no diagonal gaps)40
Filled disc97
Flat edge on each side5
5-high tower wall140 · 2×64 + 12

Rule: a block counts when its centre lies inside the circle, the same grid the game uses. Checked 21 Oct 2026.

block to placetrue centre
Every 5th line from the centre is darker

How to build it

  1. Mark the centre block. Count 5 blocks out from the centre block in all four directions and mark those four points.
  2. Place the four flat edges of 5. Centre each flat edge on one of the four points: 2 blocks either side of it.
  3. Fill each corner with 1·1. After each run, step one block diagonally inward and place the next run. Do the same in all four corners.
  4. Repeat for each layer. A straight wall is the same ring on every layer (a 5-high wall takes 140 blocks). A dome or sphere shrinks the ring as it goes up.
All 11 rows, north to south

Each row lists its runs of blocks from west to east; "2-2" means 2 blocks, a gap, then 2 blocks.

  1. 5
  2. 1-1
  3. 1-1
  4. 1-1
  5. 1-1
  6. 1-1
  7. 1-1
  8. 1-1
  9. 1-1
  10. 1-1
  11. 5

Nearby sizes

DiameterOutlineFilledQuarter pattern
820524-1-4
924695-1-5
1028804-2-1-4
1128975-1-1-5
12321124-2-2-4
13361375-2-2-5
14361566-1-1-1-6

Every size from 5 to 128 in one table · How to build a perfect circle

Questions

How many blocks is a 11 block circle?

28 blocks for a 1-block outline with diagonal steps, 40 for an outline with no diagonal gaps, and 97 for a filled disc.

Should I build 11 or 10?

11 is odd, so the circle has one centre block: doors, beacons and pillars line up with the middle. 10 has a 2×2 centre instead.

How many blocks for a 11 sphere or dome?

A hollow 11 block sphere with a 1-block shell takes 278 blocks; a hollow 11 dome (6 layers, open at the bottom) takes 149. Plan them layer by layer in the sphere generator or the dome generator.

Thin or thick outline?

A thin outline (28 blocks) steps diagonally, so mobs and water can slip through the corners. A thick outline (40 blocks) adds a block at every step, which makes a sealed wall.

Esc
↑ ↓ move↵ openEsc close