SeedViewBUILD STUDIO home
For grown-ups

13 block circle in Minecraft (radius 6)

A 13-block-wide circle takes 36 blocks for a 1-block outline and 137 to fill it. Go around each quarter in runs of 5·2·2·5. The centre is a single block, because 13 is odd.

36OUTLINE BLOCKS
137FILLED
36STACKS

Download (1 layer, stone):.litematic.schem.mcstructure (Bedrock)How to import

Diameter13 blocks (radius 6 from the centre block)
Outline, thin wall (diagonal steps)36
Outline, thick wall (no diagonal gaps)48
Filled disc137
Flat edge on each side5
5-high tower wall180 · 2×64 + 52

Rule: a block counts when its centre lies inside the circle, the same grid the game uses. Checked 21 Oct 2026.

block to placetrue centre
Every 5th line from the centre is darker

How to build it

  1. Mark the centre block. Count 6 blocks out from the centre block in all four directions and mark those four points.
  2. Place the four flat edges of 5. Centre each flat edge on one of the four points: 2 blocks either side of it.
  3. Fill each corner with 2·2. After each run, step one block diagonally inward and place the next run. Do the same in all four corners.
  4. Repeat for each layer. A straight wall is the same ring on every layer (a 5-high wall takes 180 blocks). A dome or sphere shrinks the ring as it goes up.
All 13 rows, north to south

Each row lists its runs of blocks from west to east; "2-2" means 2 blocks, a gap, then 2 blocks.

  1. 5
  2. 2-2
  3. 1-1
  4. 1-1
  5. 1-1
  6. 1-1
  7. 1-1
  8. 1-1
  9. 1-1
  10. 1-1
  11. 1-1
  12. 2-2
  13. 5

Nearby sizes

DiameterOutlineFilledQuarter pattern
1028804-2-1-4
1128975-1-1-5
12321124-2-2-4
13361375-2-2-5
14361566-1-1-1-6
15401775-2-1-2-5
16442086-2-1-2-6

Every size from 5 to 128 in one table · How to build a perfect circle

Questions

How many blocks is a 13 block circle?

36 blocks for a 1-block outline with diagonal steps, 48 for an outline with no diagonal gaps, and 137 for a filled disc.

Should I build 13 or 12?

13 is odd, so the circle has one centre block: doors, beacons and pillars line up with the middle. 12 has a 2×2 centre instead.

How many blocks for a 13 sphere or dome?

A hollow 13 block sphere with a 1-block shell takes 414 blocks; a hollow 13 dome (7 layers, open at the bottom) takes 201. Plan them layer by layer in the sphere generator or the dome generator.

Thin or thick outline?

A thin outline (36 blocks) steps diagonally, so mobs and water can slip through the corners. A thick outline (48 blocks) adds a block at every step, which makes a sealed wall.

Esc
↑ ↓ move↵ openEsc close